Conventional PCB
Conventional PCB | |
| The conventional PCBs have electrical connection on the normal FR-4 material through the vias. After a long-term development, it has evolved from single-layer to double-layer, multi-layer PCBs. | |
| PCB circuit board Files format: | Gerber, .pcb, .pcbdoc or .cam |
| Printed circuit board Materical: | FR4 |
| PCB board Surface Finishing: | ENIG/OSP/Gold Plating(Soft/hard) /HASL/Imm. Silver/IMM.Tin/Tin Plating/Carbon Ink/Selective /Imm.metal+OSP |
| PCB board Cooper Thickness: | 0.5OZ-12OZ |
| Printed circuit board Layer: | 1-24 Layer |
| Printed circuit board thickness: | 0.25mm -10mm |
| Min PCB Line Width/Spacing: | 0.075mm/0.065mm |
| PCB board Min S/M Bridge: | 0.075mm |
| Min PCB PTH Hole Size: | 0.15mm |
| Min PCB Microvia Hole Size: | 0.1mm |
| PCB board Outline Tolerance : | ±0.10mm |
| PCB PTH Aspect Ratio : | 10/0.1 |
| Impedance Control Single-ended/Differential: | ±10% |
| PCB board Bow and Twist : | 0.75% |
Sample PCB Producing Leadtime | ||
PCB layer | Urgent （hour） | Normal （day） |
1 、2L | 24 | 4–5 |
4L | 48 | 5–7 |
6 、8L | 72 | 7–9 |
10 L and up | To be determined based on gerber file | |
The above lead time is based on： | 1.Material Available | |
2.All Engineering issues comfirmed | ||
PCB Mass Producing Leadtime | ||
PCB layer | Urgent （hour） | Normal （day） |
1 、2L | 24 | 4–5 |
4L | 48 | 5–7 |
6 、8L | 72 | 7–9 |
10 L and up | To be determined based on gerber file | |
The above lead time is based on： | 1.Material Available | |
2.All Engineering issues comfirmed | ||
